RESIN STORE

FREE SHIPPING on all orders over £100

01208 264999

sales@resinstore.com

EASY FAIR TROWELABLE & SPREADABLE are light weight epoxy filler, waterproof two component epoxy compounds that are easy to mix and apply and are easy to sand to a perfect finish. Together with EASY FAIR SEU sandable epoxy undercoat they cater for all marine filling and fairing requirements above and below water.   

• Low Density, Tough & Flexible

• Waterproof, can be used underwater

• Easy to sand to a perfect finish with feather edges

• Quick cure enables rapid finishing

EASY FAIR fillers have excellent tensile and compression strength but are tough, flexible and do not crack or split. Because they are resilient they have high impact resistance and do not easily dent or mark.

EASY FAIR fillers can be applied to virtually any substrate including GRP, aluminium, steel, plywood and timber. EASY FAIR bonds tenaciously to the substrate and is easily sanded to a fine finish. Perfect feather edges are easy to achieve. They should be applied to previously primed surfaces and should be allowed to cure before sanding.

EASY FAIR TROWELABLE epoxy filler is stiff enough when mixed  to be applied in layers up to 25 mm thick without sagging or fear of cracking, but is soft enough to be easily applied and trowelled to a feather edge.

EASY FAIR SPREADABLE epoxy filler is more fluid than the trowel-able grade and  is suitable for filling shallow imperfections such as are found on gel peeled GRP hulls. It is easy to mix and is best applied in thin layers with a flexible metal or plastic applicator.

Both grades have a working life of 25 minutes at 20c and can be sanded after 2½ hours to an extremely smooth finish and to an unperceivable edge. Slower setting hardener paste with a longer working life is available to order.

APPLICATION INSTRUCTIONS

LOW DENSITY, EASY SAND

TROWELABLE AND SPREADABLE EPOXY FILLER