RESIN STORE
FREE SHIPPING on all orders over £100
01208 264999
SAFEGUARD EA is a low solvent, two part epoxy coating that contains a high content of minute ceramic micro-spheres which enhance the epoxies natural water resistance. It has been specifically developed for use on GRP hulls to provide protection against “osmosis”. The result is a coating which is incredibly abrasion resistant and which has extremely low permeability to oxygen and water vapour. It should be used where an economical but effective osmosis protection coating is needed without the requirement for rapid over-coating. SAFEGUARD EA is available in pale grey and mid grey. Use alternate colours to enable each coat to be easily visible during application.
|
HOVER MOUSE OVER PICTURE TO ENLARGE |
|
PRICE (£) EX VAT |
|
|
|
SAFEGUARD EA - Epoxy ceramic waterproof coating - Low solvent - 1 Litre Pack
- Coverage 8sqm |
|
|
|
|
SAFEGUARD EA - Epoxy ceramic waterproof coating - Low solvent - 2.5 Litre Pack
- Coverage 20sqm |
|
|
|
|
SAFEGUARD EA - Epoxy ceramic waterproof coating - Low solvent - 5 Litre Pack
- Coverage 40sqm |
|
|
SAFEGUARD TSF is a totally solvent free, two part epoxy coating that contains a high content of minute ceramic micro-spheres which enhance the epoxies natural water resistant properties. It has been specifically developed for use on GRP hulls for protection against “osmosis”. The result is a coating which is incredibly abrasion resistant and which has extremely low permeability to oxygen and water vapour. It should be used where effective osmosis protection coating is required with the ability for multiple coats to be applied in quick succession without the fear of solvent entrapment. SAFEGUARD TSF is available in pale grey and mid grey. Use alternate colours to enable each coat to be easily visible during application.
|
HOVER MOUSE OVER PICTURE TO ENLARGE |
|
PRICE (£) EX VAT |
|
|
|
SAFEGUARD TSF - Osmosis treatment coating - Waterproof epoxy ceramic - 1 Litre Pack
- Coverage - 8sqm |
|
|
|
|
SAFEGUARD TSF - Osmosis treatment coating - Waterproof epoxy ceramic - 2.5 Litre Pack
- Coverage - 20sqm |
|
|
|
|
SAFEGUARD TSF - Osmosis treatment coating - Waterproof epoxy ceramic - 5 Litre Pack
- Coverage - 40sqm |
|
|
|
STAGE |
Full treatment for gel peeled craft |
Protective treatment for craft with low moisture readings |
|
1 |
Dust surface & ensure that it is clean and dry |
Remove old antifouling, degrease and sand to a smooth mat finish |
|
2 |
Apply 1 coat of SAFEGUARD LVP |
Dust surface & ensure that it is clean and dry |
|
3 |
Apply 5 coats of SAFEGUARD EA or TSF |
Apply 3 coats of SAFEGUARD EA or TSF |
|
4 |
Apply 1 coat of Easy Fair SEU |
Apply 1 coat of Easy Fair SEU |
|
5 |
Sand with a DA sander to a smooth finish |
Sand with a DA sander to a smooth finish |
|
6 |
Optionally apply 1 Coat of SAFEGUARD PS |
Optionally apply 1 Coat of SAFEGUARD PS |
|
7 |
Followed by 2 coats of COPPERPLUS |
Followed by 2 coats of COPPERPLUS |
OSMOSIS TREATMENT COATING SEQUENCE
Tel. 01208 264999 Fax 01208 264998
