RESIN STORE
FREE SHIPPING on all orders over £100
01208 264999
GRP EPOXY PRIMER
SAFEGUARD LVP is a clear, solvent free, low viscosity two component epoxy primer for peeled GRP. It contains additives that promote the displacement of air and bonding of the new coating to the existing resin and reinforcement. SAFEGUARD LVP will penetrate and consolidate resin starved and porous areas of laminate.
|
HOVER MOUSE OVER PICTURE TO ENLARGE |
|
PRICE (£) EX VAT |
STOCK |
|
|
|
SAFEGUARD LVP - Low viscosity primer - Designed for Gel peeled GRP - 1 Litre Pack
- 2:1 Mix Ratio - Easy to Mix and apply
- Coverage - 8sqm |
|
|
|
|
|
SAFEGUARD LVP - Low viscosity primer - Designed for Gel peeled GRP - 2.5 Litre Pack
- 2:1 Mix Ratio - Easy to Mix and apply
- Coverage - 20sqm |
|
|
|
|
|
SAFEGUARD LVP - Low viscosity primer - Designed for Gel peeled GRP - 5 Litre Pack
- 2:1 Mix Ratio - Easy to Mix and apply
- Coverage - 40sqm |
|
|
|
SAFEGUARD PS is a low viscosity, two component epoxy primer-sealer developed for application to GRP or existing coatings. It contains special additives to ensure permanent adhesion to the substrate. SAFEGUARD PS is intended for use as a primer for COPPERPLUS ANTIFOULING but is also ideal for use where excellent adhesion of subsequent coatings or fillers is essential.
|
HOVER MOUSE OVER PICTURE TO ENLARGE |
|
PRICE (£) EX VAT |
STOCK |
|
|
|
SAFEGUARD PS - Low viscosity primer-sealer - For use over gel-coat or epoxy coatings - 1 Litre Pack
- Exceptional Adhesion - Easy to Mix and apply
- Coverage - 6sqm |
|
|
|
|
|
SAFEGUARD PS - Low viscosity primer-sealer - For use over gel-coat or epoxy coatings - 2.5 Litre Pack
- Exceptional Adhesion - Easy to Mix and apply
- Coverage - 15sqm |
|
|
|
|
|
SAFEGUARD PS - Low viscosity primer-sealer - For use over gel-coat or epoxy coatings - 5 Litre Pack
- Exceptional Adhesion - Easy to Mix and apply
- Coverage - 30sqm |
|
|
|
|
STAGE |
Full treatment for gel peeled craft |
Protective treatment for craft with low moisture readings |
|
1 |
Dust surface & ensure that it is clean and dry |
Remove old antifouling, degrease and sand to a smooth mat finish |
|
2 |
Apply 1 coat of SAFEGUARD LVP |
Dust surface & ensure that it is clean and dry |
|
3 |
Apply 5 coats of SAFEGUARD EA or TSF |
Apply 3 coats of SAFEGUARD EA or TSF |
|
4 |
Apply 1 coat of Easy Fair SEU |
Apply 1 coat of Easy Fair SEU |
|
5 |
Sand with a DA sander to a smooth finish |
Sand with a DA sander to a smooth finish |
|
6 |
Optionally apply 1 Coat of SAFEGUARD PS |
Optionally apply 1 Coat of SAFEGUARD PS |
|
7 |
Followed by 2 coats of COPPERPLUS |
Followed by 2 coats of COPPERPLUS |
OSMOSIS TREATMENT COATING SEQUENCE
Tel. 01208 264999 Fax 01208 264998
