RESIN STORE
FREE SHIPPING on all orders over £100
01208 264999
TIMBERSEAL PS is a low viscosity, solvent free epoxy wood primer which penetrates into timber saturating it before curing. Its primary use is as a primer under other coatings but it can also be used for the restoration of old timber by the resin impregnation technique or in new construction as a pre-treatment for epoxy glued joints.
TIMBERSEAL PS is preferably applied to dry wood but will adhere well to damp timber. However a high moisture content will prevent TIMBERSEAL PS soaking into the wood.
TIMBERSEAL PS has a pot life of 1.5 hours at 20C but will remain fluid on a timber surface for several hours. The hardener contains a wood oil that gives it natural flexibility and toughness combined with the strength and durability of epoxy.
- Low viscosity and slow cure promotes penetration into timber
- Natural tall (wood) oil in the hardener provides flexibility and compatibility with the timber
- Excellent adhesion, even to teak and damp wood, far greater than conventional primers
- Economical, no more expensive than many conventional coatings
|
HOVER MOUSE OVER PICTURE TO ENLARGE |
|
PRICE (£) EX VAT |
STOCK |
|
|
|
TIMBERSEAL PS - Low Viscosity - Wood Penetration Primer - 500ml Pack
- Coverage 5sqm |
|
|
|
|
|
TIMBERSEAL PS - Low Viscosity - Wood Penetration Primer - 1 Litre Pack
- Coverage 10sqm |
|
|
|
|
|
TIMBERSEAL PS - Low Viscosity - Wood Penetration Primer - 2.5 Litres Pack
- Coverage 25sqm |
|
|
|
|
|
TIMBERSEAL PS - Low Viscosity - Wood Penetration Primer - 5 Litres Pack
- Coverage 50sqm
|
|
|
|
Tel. 01208 264999 Fax 01208 264998